Compare charging tariffs by converting energy charges, time charges and subscriptions into the cost of the same driving distance. Under time billing, the average power actually accepted by the vehicle matters more than the charger nameplate.
Contents
- Converting tariffs into driving cost
- Consider “by base” and “by affiliation” separately.
- Make a record of a single charge that can be checked
- Charge amount and bill amount are not the same number
- If you have trouble with monthly aggregation, decide on exceptions.
- Compare charging records with billing/operation
- What to check on your first try
- Summary: Connecting identification, recording, and allocation
- Technical support information
- Related Articles
- Discuss your project
As company EVs begin to travel between multiple sales offices and business offices, there will be situations where the charging location and the department responsible for paying the charge do not match. Even if you know the electricity bill for the entire site, if you don't know which vehicles charged when, where, and how much, it will be difficult to tabulate by vehicle or department.
What is needed is a design that connects vehicle identification, charging amount recording, unit price, and cost allocation rules. In this article, we will organize everything from deciding the units you want to manage, to verifying records, handling exceptions, and confirming operations. We do not assume that you will be able to obtain every item with a particular charger or vehicle.
Converting tariffs into driving cost
| Item | What to check | How to assess it |
|---|---|---|
| Energy billing | Charged kWh × price per kWh | Metering point and charging losses |
| Time billing | Minutes × price per minute | Average power and billing increments |
| Subscription | Duration, hours and eligible sites | Parking fees and excluded usage |
Consider “by base” and “by affiliation” separately.
The information required is different for management that knows the amount used at charging stations and for management that allocates costs to the vehicle's affiliation. The former focuses on the correspondence between the charger and the installation location. The latter requires correspondence between the vehicle and the base/department to which it belongs. It is important to first decide what the aggregation is for.
For example, if a vehicle from office A charges at office B, the electricity will be used at office B. On the other hand, for internal cost allocation, a rule may be to record the costs to office A. At this time, if you record the charging point and cost burden separately instead of combining them into one item, you can use it for power management at the base and aggregation by department.
Even if company cars, passenger cars, private cars, etc. are handled in the same facility, separate purposes and aggregation classifications are used. The necessary classifications and approvers are determined by internal operations, and systems and tax treatment are not determined solely by the data acquisition function.
Make a record of a single charge that can be checked
The basic unit of management is a record that can identify a single charge. Match the vehicle or user, charger, location, start/end time, and charging amount. In a configuration where only the user's authentication information can be obtained, it is necessary to supplement the information about which vehicle the user used. Avoid treating human identification and vehicle identification as the same thing.
| Recorded items | Purpose of management | Points to check |
|---|---|---|
| Vehicle/user identification | Correspondence between affiliation and charging | How can you identify what? |
| Charger/point | Aggregation by base | Registration update when relocating or exchanging |
| Start/end time | Usage history, period separation | Time standards and handling when communication is interrupted |
| Charge amount | Calculating usage and costs | Measurement position, unit, presence or absence of missing measurements |
| Charging record identifier | Verification, prevention of duplication | Handling of retransmission, interruption, and resumption |
Check the specifications and the actual device to check the acquisition items and connection method of the target device. When considering mechanisms for adding vehicle identification or linking with existing chargers, we evaluate the information obtained from the target combinations. It is important not to generalize the results of one device to all vehicles and chargers.
Charge amount and bill amount are not the same number
In basic cost calculation, the unit price for the target period corresponds to the recorded charging amount. However, actual electricity charges include items that vary depending on the contract and time of year. If you calculate without deciding what to include in the unit price multiplied by the amount of charging, you will not be able to understand the relationship with the bill or the electricity bill for the entire site.
Whether common costs such as equipment, maintenance costs, and basic charges are to be distributed according to the amount of charging or to be borne by the base is decided based on management objectives. For unit prices, set values and application periods are recorded in the history, so that even if prices change later, past aggregates will not be rewritten without permission.
A simple allocation example for illustrative purposes
If a single recording is 20 kWh and the internal unit price for calculation is 30 yen/kWh, the usage portion is 600 yen. This does not indicate the actual contract unit price or charging fee. If you want to handle common expenses separately, you can display this 600 yen and the distribution of common expenses separately, so that you can explain what is being calculated.
Also, the location and definition of the measurement may differ between the amount of electricity measured at the input side of the charger and the amount of charge obtained on the vehicle side. Decide which value to allocate and avoid simply adding up the values of the station meter, charger, and vehicle as having the same meaning.
If you have trouble with monthly aggregation, decide on exceptions.
Records that arrive later due to communication interruptions, records that were interrupted during charging, and records for which identification information could not be collected will be treated separately from normal records. Speculatively assigning unidentified charges to arbitrary vehicles will result in incorrect costs by affiliation. There needs to be a flow of leaving it as unallocated and having it checked by the person in charge before allocating it.
We will also check the mechanism to avoid double counting when the same record is sent again. It allows you to track not only record identifiers but also relationships with time, device, and charge amount. If the correction was made manually, you can explain the monthly difference by leaving the before and after changes, the reason, and the person in charge.
If a vehicle is transferred to a different department, if past charges are aggregated only based on the current department, the previous costs will also be transferred. We will consider a method to have the application start and end dates of the affiliation and correspond to the affiliation at the time of charging. Decide how to update the master and handle history for scrapped cars, loaner cars, and equipment exchanges.
Compare charging records with billing/operation
Once the aggregation screen is created, fix the target period and target equipment, and check the original charging record, vehicle/affiliation registration, and cost calculation results. Since the electricity amount for the entire site may include usage other than charging, do not assume that the entire difference is a measurement error, but rather check the difference in the measurement range and closing date.
During the monthly closing process, we list unassigned, missing data, duplicate candidates, and records that arrived later. Separate the finalized portion from the portion awaiting confirmation, and decide who will finalize the tally and at what point. Information such as the target period, unit price version, and aggregation date and time is also attached to the outputted CSV and other documents.
You can also decide whether to divide charging from the end of the month to the next month by start date, end date, or time allocation of usage. Possible methods vary depending on the data that the device can acquire. Along with how to close invoices and internal allocations, make sure that the person in charge does not use different methods to aggregate data each month.
If you also want to manage expenses paid for external charging services, separate usage details from in-site charging records. Avoid adding items with fixed amounts twice to costs recalculated using in-house unit prices. We will check which vehicle corresponds to the date of use and leave any unknown details pending confirmation.
If this verification is possible, the administrator can trace the reason behind the numbers. We don't just rely on automatic aggregation on the screen; we also conduct trials to see if the burden of actual allocation work and confirmation has been reduced.
What to check on your first try
At one location and a small number of vehicles, we will try normal charging, vehicles at another location, disconnection, interruption/resumption, and change of affiliation. Find where information is lacking in identification, recording, and allocation, and adjust the scope of management procedures and data linkages.
We also check the scope of viewing and modification by each person in charge. The charging status can be checked at the site, and the totals from multiple locations can be checked at the head office. Decide who will change the vehicle affiliation, set the unit price, and confirm the monthly price, so that you can track the reason why the numbers changed in the history.
If data is to be used for departure schedules or charging priorities in the future, it will be organized as a separate request from cost aggregation. Check whether the identified vehicle corresponds to the actual connected vehicle and what the target control interface can do. Just because expense management records are complete does not mean that charging control has been demonstrated.
- What can be identified and how to register your vehicle/affiliation?
- How to obtain charge amount, time and location, and measurement range
- Unit price, common expenses, closing date, rules for allocation destination
- Person in charge of checking missing, unassigned, and duplicate data and correction history
Summary: Connecting identification, recording, and allocation
Managing the cost of company EVs is more than just collecting the amount of charge. Separate information on charging location, vehicle affiliation, and cost calculation conditions allows you to track everything from one-time records to total results. By matching the scope of equipment acquisition with internal rules, we can proceed with management that can be explained by location and vehicle.
Technical support information
LinkT&B accepts consultations regarding vehicle identification, charging control/measurement, and data linkage. The compatible range will be confirmed depending on the specifications of the target vehicle, charger, and system. For more information, please see EV charging solutions and for individual consultation, please see Contact us.
Related Articles
What to Check Before Choosing a Portable EV Charger
From Gasoline to Electric Fleets: Managing Fuel Price Risk
Further reading: e-Mobility Power: member and visitor tariffs
Discuss your project
We help plan charging equipment, authentication and management around vehicle use and parking time. Tell us about your fleet and existing facilities.